Subdivide
Change the value of Number of Cuts in the lower left corner.Since you are editing the shape of the plane, it is best not to be too detailed.
(资料图片)
Subdivide
Then, select only the vertex at the neck, and press [G]→[Z] to lower the point.
Click on a vertex to select it.
Move it down and press Enter to confirm.
After selecting the vertex that will be the shoulder part, use the [E] key (extrude) -> [Z] key (Z-axis) to extend it.
Select the vertex that will be the shoulder part
Press [E]→[Z] key to push it out to the Z axis.
Creating a bodyCreate the fabric under the armpit.After selecting the armpit vertices as shown in the screenshot below, press the E key (extrude), S key (expand), and X key (to X axis).When the width of the body has been expanded by moving the cursor, press the Enter key to confirm.
Select the vertex under the armpit.
Move the cursor to widen the width, and press the Enter key to confirm.
Let’s make a smooth curve around the collar and armpits.
Add a modifier from the modifier properties (tool icon) on the right side of the screen.After selecting the Subdivision Surface, open the Advanced tab and change the Boundary Smoooth to Keep Corners.
Subdivision Surface
Switch to object mode by pressing the [Tab] key (or the top left button).Select Apply from the v next to the Subdivision Surface to apply it.
Switch to object mode and apply the Subdivision Surface
Switch to Edit mode again with the [Tab] key, make sure the Subdivision Surface is applied, then select all with the [A] key and push it out with the [E] key.Then move the cursor to the back of the human model, adjusting its position, and place it between the human models.
The duplicate is the back of the body.
Press [E] key to push it out, adjust it with the cursor, and press Enter to confirm.
After that, select the meshes where the neck, arms, and torso will be.You can select each mesh of the model by clicking on Select Face in the upper left corner of the screen.
Face selection mode
Select the area where the neck and arms will appear.
Don’t forget the bottom.
Delete them with the [X] key.Select Faces and delete only the faces.
Delete with [X] key
Then select the remaining Faces (i.e., the part of the shoulder and armpit that will be sewn together).Click the [X] key (Delete) -> Only Faces to delete the faces only.
Select Only Faces
Cloth simulate.Press [Tab] key to change to Object mode.
With the humanoid model selected, click Collision from the right side menu.
Select Collision from Physics Property
Next, select the clothing model and click on Cloth from the Physics Property menu as well.
Select Cloth from Physics Property
At the bottom of the Cloth menu, you will see a Shape item, and check Sewing.
Check Sewing.
Click the Play button at the bottom of the screen to start the simulation.
Click on the triangular play button.
If the simulation does not workIn some cases, the cloths are not sewn together and nothing happens after playback.If the problem is caused by duplicate vertices, it is easy to solve, so try the following method.
First, switch to edit mode by pressing the [Tab] key, and then press the [Alt] key + [H] key to make sure there are no hidden ones.
Alt key + H key
Then, select all with the [A] key.
Select all with the [A] key
Press [M] key to Merge and select By Distance.
By Distance
The 56 extra vertices have been removed.
Switch to Object mode with the [Tab] key and click the Play button again, and this time the simulation will be performed correctly.
The simulation is now running.
To fix the angle of the shoulders and the width of the body, stop playback and go back to frame 1, and then edit the shape of the plane.
Select the edges and the back of the body and press X → Delete Edges.
Modeling a CushionIn addition to clothes, you can easily create fabric products.
First, add a new Plane by pressing [Shift+A].
Add a new Plane
Switch to edit mode with the [Tab] key, then right-click and select Subdivide.
Subdividing a Plane with Subdivide
From the menu at the bottom left of the screen, set the Number of Cuts value to 10.This is because 10 is the maximum number of values that can be processed simultaneously.
Set the Number of Cuts value to 10.
Then, click anywhere on the 3DView screen to confirm, and then press [A] to select all, and right-click to select Subdivide to further subdivide.
The finer the subdivision, the better the simulation will look, but be aware that it may take a long time to process and may force Blender to close itself.
Change the value again
Then press the [E] key to push it out.A line will appear on the Z axis (i.e., the line will be pushed in the direction of the Z axis), so move the cursor and press the Enter key to confirm.
Press the [E] key to push out and press the Enter key to confirm.
After changing the angle of the screen so that the sides are visible, hold down the [Alt] key and click.
Make sure you can select the side or face from the top icon.
Select while holding down the [Alt] key
Then select [X] key -> Only Faces and delete it.
[X] key -> Only Faces
Cloth simulatePress [Tab] key to switch to object mode.Select “Cloth” from the physical properties on the right side.
Select cloth from the physical properties while in object mode with the [Tab] key.
Then set the settings as shown below.
Check the Pressure checkbox and change the value to 3.
Pressure is a necessary setting when simulating objects filled with air, such as balloons, and the larger the value, the greater the air pressure.
Check the Sewing checkbox under Shape.
Sewing is applied when sewing two pieces of cloth together.
Check the Self Collisions checkbox.
If there is a non-fabric model, collisions will be applied to it, but if there is only a fabric model, as in this case, Self Collisions can be applied to prevent the model itself from being penetrated.
Set Gravity to 0
Gravity is the force of gravity.If you set this to 0 to make the model weightless, there is no need to worry about it falling or flying away.
When you have completed all the settings, click the Play button.
Playback will simulate the model.
When you are done, stop playback and apply cloth simulation.
With the keyframe of the desired shape selected, click on the “v mark” from the modifier property Cloth and select Apply.You can make the keyframe keep its shape even if you move it.
Select Apply from v and apply.
only for learning exchange
- 黄河年均入海水量超300亿立方米 实现连续23年不断流
- 热门:大熊猫国家公园设立超一年 兼顾生态保护与经济发展
- 天天通讯!FBI称正评估抖音海外版可否在美继续运行 中方对此坚决反对
- 当前简讯:112项便民办税措施落实到位 税费支持政策直达快享
- 天天速递!今冬供暖季天然气供应总体有保障 保障人民群众温暖过冬
- 播报:数读世界杯大名单 看看老、少、高、矮都谁排第一?
- 北京朝阳区新增风险点位公布,涉及多个学校、超市、公园等
- 全球报道:引导平台经济健康持续发展
- 见字如晤|张兆和:“多情人不老”
- 世界观速讯丨《海上晨钟》演绎民族品牌的成长传奇
- 世界观焦点:还记得比尔盖茨前妻梅琳达吗?有新男友了
- 一如年少模样
- 衢州风华学校教师宋晴斩获省级比赛一等奖
- 阿根廷队将与阿联酋队进行一场友谊赛后前往卡塔尔
- 卡塔尔世界杯各队大名单全出炉 我们总结了5个“最”
- 世界消息!北京唯一“五线换乘”枢纽!丽泽城市航站楼交通枢纽获批
- 全球新动态:美国今年流感季已致1300人死亡 专家呼吁民众积极接种流感疫苗
- 天天快播:世界首个唾液孕检试剂盒即将上市
- 天天滚动:今年以来我国新开工重大水利工程45项 创历史新高
- 热点聚焦:北京朝阳:继续增加核酸检测点位和通道,优化点位布局
- 美国登月火箭终于发射升空 执行“阿耳忒弥斯1号”任务
- 看热讯:10月民航客运数据发布 主要运营指标同比下滑
- 世界热资讯!绿色菜单引领餐厅低碳消费新风尚
- 燕麦奶不等于燕麦加牛奶
- 四川省总工会职工心理健康服务活动走进遂宁
- 今日关注:北京新增感染者中,147例为隔离观察人员,涉及13区
- 全球播报:贵州大方:非遗传人高光友获“贵州工匠”称号
- 世界通讯!用包裹着火焰的诗句,抚平时光的皱纹|“娜夜诗选”首发
- 2000千克是多少吨?1吨等于多少磅?
- 含“相接”的成语有哪些?人山人海出自哪里?